- Petrofast Middle East: Fastening Solutions with Experience
- Hamriya Free Zone, Sharjah, UAE
In the power and energy sector, one failed bolt inside a turbine housing, a wind tower base, or a solar panel structure can shut down an entire facility for days. Heat, vibration, saltwater spray, and massive load cycles attack every joint constantly. Petrofast Middle East FZC engineers and manufactures high tensile fasteners, stud bolts, and anchor systems designed to hold tight under these exact conditions. As a trusted name in power and energy engineering UAE industries depend on, we work with advanced alloys, including super duplex stainless steel and nickel-based grades, to stop corrosion and joint fatigue before they start. We are a premier source for high-quality energy fasteners UAE projects rely on, and we rank among the top energy sector fasteners supplier UAE, delivering products that meet strict ASTM, ISO, DIN, and EN standards.
Petrofast Middle East FZC engineers and manufactures heavy duty fasteners and precision-certified components for turbine bases, cable tray systems, transformer pads, substation structures, and renewable energy frames. Our full range of industrial fasteners for power plants keeps rotating equipment, structural steel, and critical electrical assemblies secured at all times.
We manufacture custom Anchor Bolt sets in L-shape, J-shape, straight, and plate-welded styles. Built to ASTM F1554 and ISO 898-1 (Grades 36, 55, and 105), they come in hot-dip galvanized or black finishes for generator and turbine foundations.
Our Stud Bolt range covers ASTM A193/A193M Grades B7, B16, B8, and B8M. They connect high-pressure steam turbines and boilers. Special PTFE, zinc, and hot-dip galvanized coatings protect them from harsh chemicals in power plants.
Our Hex Bolt selection follows DIN 931, DIN 933, and ISO 4014 standards in classes 4.8 to 12.9. Made of stainless steel 304, 316, and super duplex, they secure heavy electrical switchgear and cable ladder frames
Our Threaded Bars meet ASTM A193/A193M and ISO 898-1 standards. We supply them in carbon steel, stainless steel, super duplex, Monel, and Hastelloy with custom threads and lengths for support structures and power plant mounting jigs.
We manufacture U-Bolt parts to fit pipes from 1/2 inch to 40 inches wide. Available in carbon steel, stainless steel, and super duplex, our PTFE-coated options stop rust on outdoor pipe racks and water lines.
We supply flat, spring, square, spherical, DTI, and Belleville Washers to DIN 125, DIN 127, ASTM F436M, and EN 14399 standards. Made of 304, 316, or duplex steel, they stop bolts from loosening under heavy turbine vibration.
Petrofast Middle East FZC manufactures tough fasteners that resist high heat, heavy loads, and rust. They protect power and energy sector services UAE facilities. These include gas-fired plants, big solar farms, and offshore wind turbines, keeping all critical systems safe and secure.
Our ASTM A193 Grade B7 and B16 stud bolts handle heat up to 450°C and pressure over 250 bar. They are perfect for steam turbines, boilers, and pipes for combined-cycle power plant fasteners supplier UAE projects.
Our foundation anchor bolts meet ASTM F1554 Grade 55 and 105 standards. They secure heavy generators, turbines, and transformers. We manufacture L-type and plate-welded styles from M12 to M100-plus with a hot-dip galvanized finish.
Super duplex S32750 and S32760 hex bolts, threaded bars, and u-bolts meet ASTM A276 standards. They stop rust on offshore platforms, sea desalination plants, and marine structures where normal stainless steel fails.
Our heavy hex bolts and washers meet ASTM F3125 and EN 14399 standards. With HDG and zinc finishes, they secure cable trays, steel towers, and substation frames for electrical infrastructure fasteners supplier projects in the UAE.
Petrofast Middle East FZC is your single-source partner for industrial fasteners for power generation and engineering fasteners supplier UAE requirements across the GCC. Providing top-grade industrial fasteners Sharjah and global markets depend on, we are ready to serve any project. Whether you need standard stock items for an MRO call-off or a fully engineered fastener package for a large IPP or EPC power contract, our technical team is ready to review your specifications and deliver a compliant, code-approved, cost-effective solution.
We supply ASTM A193 B7 and B16 for high-heat steam. We also offer B8 and B8M stainless steel for rust protection. Matching nuts meet ASTM A194 Grade 2H and 8M with certified test reports
Yes, we manufacture L-type, J-type, and plate-welded anchor cages to ASTM F1554 Grade 55 and 105, and EN10025-2 Grade S355JR. Sizes run from M30 to M100-plus with hot-dip galvanized finishes.
We offer hot-dip galvanized, PTFE-coated, and stainless steel 316 finishes. For salty deserts, super duplex S32750 and S32760 grades resist rust perfectly without coatings, keeping your long-term maintenance costs very low.
Yes, we supply heavy hex bolts and nuts meeting ASTM F3125, DIN 931/933, and EN 14399 standards. We offer hot-dip galvanized and electro-zinc finishes for indoor and outdoor electrical switchyards.
Every order includes lab reports from ISO 17025 partners. We also do PMI and NDT testing. Our ISO 9001:2015 system checks every step from raw metal to final delivery.