- Petrofast Middle East: Fastening Solutions with Experience
- Hamriya Free Zone, Sharjah, UAE
Petrofast Middle East manufactures high-strength foundation bolts in accordance with ASTM F1554 Grade 105, EN 10025-2 S355JR, and duplex stainless steel grades in our local UAE factory. As the leading anchor bolt supplier in UAE, we supply full sets, including heavy hex nuts and hardened washers under certified inspection standards. Submit your design drawings today and get an all-inclusive quote in 1 day.
Industrial sites across Sharjah and Dubai face blistering heat and aggressive saline water tables. Our fasteners keep structural frames anchored under extreme dynamic loads.
Anchor bolts are made according to ASTM F1554 Grade 105 and ISO 898-1 Class 10.9 standards. Each batch is made with certified carbon and alloy steels that are protected against micro-fractures under heavy mechanical stresses.
Aggressive coastal humidity and high soil salinity in the UAE quickly destroy inappropriate fastener coatings. In addition to hot-dip galvanizing, we also supply fasteners Electro Zinc and Black Finish coatings. These products prevent chloride-induced pitting in marine and petrochemical environments.
For rigid engineering drawings, normal off-the-shelf fasteners do not stand up to the tests. Our precision machines in Sharjah provide diameters ranging from M10 to M100, with accurate thread pitches, custom bend radii, and plate-welded bolts, all accompanied by Material test certifications
For heavy structural columns, it is essential to ensure that mechanical locking is complete in the poured concrete foundations. We can manufacture special L-bolts, J anchor bolts, and T-type anchor bolts to eliminate slip during heavy use. Each rod is made in our Sharjah plant, which meets the ISO 898-1 Class 8.8 and 10.9 tolerances.
Petrofast supports a wide range of anchor bolt sizes and dimensions. Moreover, the team produces accurate thread pitches and exact bend radii on a variety of footprints. They come in a variety of sizes from the small (M6) to the very large (M100 – industrial bolts). The length ranges from 50mm to up to 3000mm and beyond for light steelwork to heavy skyscraper frames and bridge girders.
Don’t settle for low-quality parts from overseas and poor tolerances. Engineering drawings submitted today will receive a formal anchor bolt price quote within 24 hours.
We manufacture L anchor bolts from ISO 898-1 Class 8.8 and 10.9 high-tensile steels. Bending is done through controlled thermal processes to avoid microfractures at the 90° bend.
The foundation tethers of crane rails and gantry columns must not give way. Our J-bolts have extra thread length for use with thick leveling plates and double heavy hex bolt stacks.
Cross pin and T-type anchor bolts at Petrofast are designed to eliminate slip completely. They handle severe multi-directional loads where standard bent hooks fail. Trust them for heavy machinery setups demanding uncompromising structural stability.
Custom square or rectangular steel plates from our manufacturing facility fuse permanently to precision-threaded shafts. These are built locally to withstand demanding structural engineering demands across UAE building sites without micro-fracturing.
We have S355JR and ASTM A276 stainless steel grades available, including SS316L and Duplex S31803. The alloy is essentially designed to resist the corrosive action of marine salt spray.
Our zinc-plated sleeve sets offer the strength needed in challenging environments, from M6 light rail fixings to M20 structural brackets.
Aggressive soil conditions and high humidity across the Middle East can accelerate corrosion in substandard steel fasteners. Petrofast supplies fully traceable anchor bolts manufactured to applicable international specifications, helping projects meet their material quality and performance requirements. Material selection and inspection are essential to ensure the required mechanical properties and reliability in demanding industrial environments.
Consult our material grade matrix to identify suitable options for your engineering drawings and project specifications.
|
Standard
|
Material Grades
|
Material Gradesav
|
Key Application Sector
|
|---|---|---|---|
|
EN 10025-2
|
S275JR, S355JR
|
Standard Tensile Yield
|
Structural fabrication and civil construction works
|
|
ASTM F1554
|
Grade 36, Grade 55, Grade 105
|
Guaranteed Yield Strength
|
Concrete embedment and anchor bolts
|
|
ISO 898-1
|
Class 4.6, 8.8, 10.9
|
High-Strength Fastener Class
|
Heavy industrial plant maintenance
|
|
ASTM A276
|
SS304, SS304L, SS316, SS316L, S31803, S32750, S32760
|
Superior Corrosion Resistance
|
Offshore, marine, and chemical processing plants
|
Operating out of our Hamriyah Free Zone plant in Sharjah, Petrofast delivers custom anchor bolt manufacturing designed to survive extreme thermal expansion and saline corrosion.
Standard overseas imports may not always meet the specific requirements of projects exposed to demanding heat cycles and moisture in the Arabian Gulf. Petrofast supports local production with custom anchor bolt lengths of up to 3000 mm, manufactured from certified carbon and alloy steel stock to meet project specifications. Our anchor bolt materials and production batches are subject to inspection and testing against applicable requirements, including ASTM F1554, ISO 898-1, and EN 10025-2, where relevant to the specified material and product. Petrofast provides quotations within 24 hours, supported by inspection documentation and coordinated delivery schedules to help keep projects on track.
To save installation time on active job sites, Petrofast supplies complete anchor bolt sets directly from its Hamriyah Free Zone facility. Each set can include heavy hex nuts and hardened washers, positioned to the specified standoff heights and secured with steel strapping for convenient handling and transportation.
We issue an all-inclusive price quote within 1 day of receiving your structural drawings. Actual delivery timelines depend on total order volume and requested secondary finishes Zinc plating or hot-dip galvanizing, but local manufacturing in Sharjah ensures rapid dispatch across the UAE.
Yes! Marine piers require Hot-Dip Galvanizing or Zinc-Nickel to fight heavy salt spray. Refineries exposed to harsh chemicals prefer zinc plated bolts for superior chemical resistance. If you're one of those, Electro Zinc and Black Finish coatings would be a better choice.
Thermal expansion disparities between structural steel and cured concrete can introduce micro-gaps. To prevent this degradation, we mathematically account for differential thermal coefficients during the engineering of custom ASTM F1554 and EN 10025-2 S355JR foundation bolts.
Our manufacturing facility operates under an ISO 9001:2015 quality framework. Skilled QC inspectors verify thread pitch tolerances, bend radii, and alignment against approved engineering drawings. Moreover, all high-stress weldments pass ultrasonic and magnetic particle testing